Document Revision History (2)
2. Mechanical Specifications (unit：mm) (5)
3. Features (6)
4.Logical Symbol Diagram (7)
5. Signal Description (8)
5.1 Pin Assignment (Top View) (8)
5.2 Pin Signal Description (9)
6. Electrical Characteristics (10)
6.1Operating specifications (10)
6.1. 1ABSOLUTE MAXIMUM RATING (10)
6.1.2Functional temperature (10)
6.2DC Characteristics: (11)
7. Internal Schematic (13)
8. Test Specification (14)
8.1 Image Quality Criteria (14)
8.2 Function test (15)
8.2.1 Blemish Test: (15)
8.2.2Black Test: (16)
8.2.3White Pixel Test: (17)
9. Inspection SPEC (18)
小番茄品种10.1 Test Flow (23)
10.3 Classification Reflow Profile (24)
11. Packing Specification (25)
12. Reference (25)
13. Appendix (26)
13.1：Packing drawing. (26)
13.2 Inner Box Lable (27)
3 / 28
13.3 External Box Lable (28)
1. General Description
The OV13850 color image nsor is a low voltage, high performance 1/3.06-inch 13.2 megapixel CMOS image nsor that provides the functionality of a single 13.2 megapixel (4224×3136) camera using OmniBSI+™technology. It provides full-frame, sub-sampled, windowed 10-bit MIPI images in various formats via the control of the Serial Camera Control Bus (SCCB) interface.
荷塘月色原文
The OV13850 has an image array capable of operating at up to 24 frames per cond (fps) in 10-bit 13.2megapixel resolution with complete ur control over image quality, formatting and output data transfer. All required image processing functions, including exposure control, white balance, defective pixel canceling, etc., are programmable through the SCCB interface.
In addition, OmniBSI image nsors u proprietary nsor technology to improve image quality by reducing or eliminating common lighting/electrical sources of image contamination, such as fixed pattern noi,smearing, etc., to produce a clean, fully stable, color image.
睡前音乐For customized information purpos, the OV13850 includes a one-programmable (OPT) memory. The OV13850 has up to four lanes of MIPI interface.
The OV13850 is suitable for low power camera module
儿童帽子图片大全4/ 28
2. Mechanical Specifications (unit：mm)
蒜叶的生长
5 / 28
本文件為旺福電子（股）公司之財産，非由書面許可，不准透露或使用本檔，亦不准複製或何其他形式使用
The information contained here is the exclusive property of WF Electronic Co., LtdAnd shall not be distributed the reproduced or disclod in whole or in part without prior permission.
3. Features
◆Lens size:1/3.06 inch
◆Pixel size:1.12mm×1.12mm
◆31.2o CRA for<6mm z-height
◆programmable controls for frame rate,mirror and flip,cropping and windowing
◆13.2MP AT 30fps
◆two-wire rial bus control(SCCB)
◆strobe output to control flash
◆supports output formats:10-bit RAW RGB
◆supports image sizes:13.2MP(4224×3136),10MP(4224×2376),4K2K(3840×2160),EIS 1080P(2112×1188),EIS 720P(1408×792),and more3
病毒的由来◆support 2×2 binniing
◆Up to 4-lane MIPI rial output interface
消防安全主题班会记录◆standard rial SCCB interface
朋友圈的文案◆8kbits of embedded one-time programmable(OTP) memory(e sidebar note)
◆two on-chip pha lock loop(PLLs)
◆programmable controls: gain, exposure, frame rate, image size, horizontal mirror, vertical flip cropping, and panning
◆built-in temperature nsor
◆image quality controls: defect correction, automatic black level calibration, lens shading correction ,and altemate row HDR.
◆Guaranteed Operating temperature :-300C to +850C
◆Bake The product Before SMT process( Operating temperature):1250C(1Hour)
◆Power Supply:Core:1.14V-1.26V,analog:2.6-3.0V I/O:1.7-3.0V
6 / 28
4.Logical Symbol Diagram
7 / 28
